2019年12月13日星期五

Classification of steel rope

The steel rope is divided into two types hemp core and steel core.  according to the rope core. 
(1) The hemp core is divided into two types: natural fiber core (NF) and synthetic fiber core (SF).
The fiber core has the following characteristics: the fiber core wire rope is soft and has good bending performance. The fiber core acts as a buffer when the steel rope is subjected to impact and impact loads during operation. Natural fiber cores store a lot of oil. When the steel rope is working, it has sufficient lubrication inside and can slow the corrosion of the steel wire. Synthetic fiber cores (such as: polypropylene, polyethylene) have strong toughness, no water absorption, acid resistance, alkali resistance, corrosion resistance, and extrusion resistance. The steel rope is not easily deformed during dynamic load use, and the diameter is uniform and stable.
(2) The steel core is divided into two types: independent metal core (IWRC), parallel tantalum core (CFRC) and independent metal core (IWSC).
The metal cord steel rope has the following characteristics: the metal core steel rope has large breaking force, resistance to extrusion and high temperature resistance.

2019年12月8日星期日

Brief analysis of escalator handrail

Price difference of escalator handrail belts: Handrail belts are usually composed of styrene-butadiene rubber (SBR) and natural rubber. The formula of the handrail strap itself is different, which directly affects the stability and life of the escalator handrail. Shaanxi Sanjin Elevator Fittings Co., Ltd. has been cooperating directly with the manufacturer of brand escalator handrail supply many years,could offer different kinds of handrails,such as Mistubishi,KONE,Schindler,Thyssen,fujtec,OTIS escalator handrail . The formulation of the factory is stable, the material is high quality, and the product can be used for 3-5 years without any problems. Therefore, the cost is relatively high, but the price is reasonable because of the large sales quantity. Nowadays,In order to compete with others, some small factories may use reclaimed rubber, which is rechargeable and has a life of only 1-2 years. Therefore, the price is lower. When choosing the supplier of eacalator handrail, please consider the cost-performance ratio comprehensively, and it is better don't only focus on the price.

In addition, when the handrail is installed, it should not be too tight, will cause fever situation,also will affect the life of the handrail.

2019年10月21日星期一

Elevator modernization details

1. Change elevator’s old specifications, different types of traction machines, control cabinets and related control circuit boards, related cables, change full set intercom system and shaft lighting system, car top and car bottom inspection device
2. Change the control mode of the landing door and the car door, opening type, increase the landing door or the car door;
3. Install automatic rescue operation (automatic leveling), car accidental mobile protection device, energy feedback energy-saving device, card reader (IC card), etc., to increase the elevator's more comprehensive to ensure passengers safety

Shaanxi Sanjin Elevator Fittings Co., Ltd. has a strong technical team and fully mature elevator renovation experience, will provide you with a full range of customized modernization solutions

2019年9月28日星期六

The necessity of elevator Modernization

Due to the long use time of the elevator and the aging of the equipment, different degrees of electrical failure often occur, resulting in a series of maintenance costs, and the early control system can not meet the requirements of energy saving, comfort and environmental protection, it is difficult to load the latest elevator use standards, exist Great security risks.
According to the elevator usage report, the elevator also has a long life. From the time of installation and delivery, once the usage time reaches 20 years, there will be many problems that cannot be avoided through maintenance.
modernize the old elevators at an appropriate time is an inevitable trend in the development of the industry.

Shaanxi Sanjin Elevator FittingSanjin Elevator Parts has a strong technical team and fully mature elevator renovation experience, will provide you with a full range of customized modernization solutions

2019年8月15日星期四

Basic Requirements for Elevator Maintenance

1. Elevator maintenance is required once a week for no less than two hours. Maintenance personnel are required to maintain the elevator at regular intervals.
2. Check all parts below elevator to ensure it works normally, cleanly and lubricates.
2.1. Power switch and safety switch.
2.1.1 The main switch and limit switch of the control cabinet are complete and undamaged, and the wiring is firm.
2.1.2. Check the contact of fuse and fuse. The contacts are firm and there should be no fire.
2.1.3. Safety switches, such as emergency stop, safety window, bottom hole and limit, should be in good contact and operate normally and reliably. No spanning.
2.2. Drawing machine: Appearance body should be clean and bright.
2.2.1 Reducer
A. The operation should be smooth without abnormal vibration.
B. The oil level height of the gearbox shall be kept within the prescribed oil level line.

C. The oil temperature of the reducer shall not exceed 85 C.
2.2.2. Motor
A. There should be no friction, collision or other noise in the operation of the motor. If there is any abnormal noise, the ladder should be stopped to check whether there is foreign body intruding into the sliding bearing and whether the bearing is damaged.
B. The oil level of the motor should be near the center of the oil mirror.
C. The ambient temperature of the motor should not be higher than 40 C, and the temperature rise should not be higher than the nameplate stipulation.
D. The displacement of motor bearings is less than 4 mm.
2.3. Brake.
2.3.1. Stable and reliable operation, no slippage, no less than 70% of the contact surface of the brake shoe.

The Function of Elevator Frequency Converter


The Function of Elevator Frequency Converter:
Elevator frequency converter is divided into door system frequency converter and main control system frequency converter.
The door system frequency converter also called door controller,it is used to control the lateral running speed of the door panel.
The main control system frequency converter also called main drive or inverter,it is used to control the longitudinal running speed of the car.
The common point is that the elevator speed and power saving are achieved by adjusting the frequency of the radio wave.
Shaanxi Sanjin Elevator Fittings Co., Ltd. can provide you with a variety of safety gears of different specifications for your choice,such as KONE  KDM,V3F16L,KDL16L,KDL16R,KDL16S inverters, schindler VF33BR main drive,Panasonic door controller ,selcom ,fermater ,anliso door controller and so on. Welcome to send inquiries and place orders.

2019年4月16日星期二

China Elevator Manufacturers Rank in 2019

Nowadays, with the acceleration of urbanization and the improvement of people's living standards, people's demand for elevators is growing. Not only new buildings and shopping malls are equipped with elevators, but also many old residential areas are equipped with elevators. Elevators have become an indispensable and important infrastructure in people's lives. But at resent, the elevator market manufacturers are mixed, and there are few elevator manufacturers with real strength. At present, the latest elevator brand ranking of the first choice for users in the Chinese market in 2019 has been released strongly. As one of the most authoritative, independent and objective lists in the elevator market industry, it has attracted great attention from the people of the whole country as soon as it is released. Now let's see what strength elevator manufacturers are selected. The following rankings are in no order for your reference.
Shanghai Mitsubishi Elevator
KONE Elevator
Schindler Elevator
Thyssenkrupp Elevator
Otis Elevator
Toshiba Elevator
Hitachi Elevator
XIZI Otis Elevator
These are the rankings of authoritative and well-known elevator manufacturers selected according to the strength of the manufacturers. Overall, domestic elevator manufacturers are still mainly foreign-funded and joint ventures. But the national elevator brand with certain strength is also rising in recent years.
Shaanxi Sanjin elevator fittings Co,.Ltd specializes in export for all kinds of elevator and escalator parts. We have stable and friendly cooperation with large number of large scale elevator parts manufactures. So far. our customers from over 100 countries in the world, Such as Russia, United Kingdom,Japan,Pakistan,Malaysia,Iran,India,Indonesia,Philippines,etc.We have received wide approval and trust from the customers both at home and abroad because of the competitive price,excellent after-sale service.
We have built long-term business relationship with many famous international forwarder,companies.Such as Fedex,DHL,TNT,etc.and we also have special messengers to track the items,and keep update with the customs to make sure customers can receive the items in time.
Customer demands is our goal,Customer satisfaction is our pursuit.Customer first is our eternal philosophy. Your patronage is expected by every employees in Shaanxi Sanjin where you will receive the most satisfactory service from our dedicated service team,and buy products with best quality in the most preferential price!